Change eMMC Only Redmi 7 Onclite | Fix IMEI | Auto UBL | TWRP Root
Assalamualaikum warahmatullahi wabarakatuh, hello friends. This time i want to share about Change eMMC Only Redmi 7 Onclite using 'UFI Box', in this device we cannot use 'Unlocktool', because 'Unlocktool' is not supported for this device.
1. Take eMMC (RPMB clean) by supported eMMC ids below.
Supported eMMC :
EMMC [Samsung] QE63MB
EMMC [Samsung] QX13MB
EMMC [Samsung] GE6BMB
EMMC [Samsung] GX6BMB
EMMC [Samsung] QD63MB
EMMC [Samsung] GD6BMB
EMMC [Samsung] RE1BMB
EMMC [Samsung] RX1BMB
EMMC [Samsung] RH64AB
EMMC [Samsung] RP64MB
EMMC [SK Hynix] JTBC
EMMC [SK Hynix] JTCC
EMMC [SK Hynix] JTMC
EMMC [SK Hynix] JTAC
EMMC [SK Hynix] FTAC
EMMC [SK Hynix] FTMC
EMMC [SK Hynix] LTMC
EMMC [SK Hynix] HAG4a2
EMMC [SK Hynix] HBG4a2
EMMC [Micron] S0J9A7
EMMC [Micron] S0J9B7
2. Download the file in the link below:
Note:This file can also be flashed using other tools such as UMT tools, PANDORA tools that already support this device, so it's possible to change eMMC only without 'UFI Box'.
And 'Extract here' using WinRAR or 7-Zip software, then flash it using 'UFI Box' via the 'Factory Image' menu, after flashing do not 'factory reset' then pair the eMMC to the machine and turn on your device.
3. Install TWRP via fastboot mode, download the file in the link below:
- Onclite_TWRP_Root_UBL (GDrive)
And 'Extract here' using WinRAR or 7-Zip software. Turn off your device then press and hold volume down+power to go to fastboot mode and then connect to the computer, then double click 'start TWRP.cmd' which is in the Onclite_TWRP_Root_UBL folder then 'press any key to install TWRP or click ENTER', now to go to TWRP manually press and hold volume up+power, then swipe to open the TWRP then choose 'Wipe' menu - Format Data - type 'yes' - click 'ok', don't close TWRP.
4. Download 'Magisk' in the link below to root your device:
- Magisk-v20.4 (GDrive)
Move 'Magisk-v20.4.zip' to SD Card and use OTG tool to connet to your device. in the TWRP choose 'Install' menu - choose 'Select Storage' - choose 'USB OTG' - click 'Oke' - choose 'Magisk-v20.4.zip' - Swipe to confirm Flash, installing zip file ongoing, after done click 'Reboot System'.
5. Restore QCN/Restore IMEI/Write IMEI, download the file in the link below:
- Qualcomm Driver Installer (GDrive)
- QPST_2.7.460_Installer (GDrive) or QFIL_Instant (GDrive)
- onclite_QCN_patched (GDrive)
Enable USB Debugging on your device in settings, connect your device to the computer, if there appears on your device screen 'Allow USB debugging' just click 'Oke', open 'CMD' on your computer and type:
adb devices (click Enter on your keyboard)adb shell (click Enter on your keyboard)su (click Enter on your keyboard)
If there appears on your device screen 'Superuser Request' just click 'Allow', then type:
setprop sys.usb.config diag,adb (click Enter on your keyboard)
Open the QFIL tool and if you see 'Please Select an Existing Port' select the 'Select Port' button then select 'Qualcomm HS-USB Android DIAG 901D (COM?) then click 'OK', now select the 'TOOLS' menu - 'QCN Backup Restore ' - click the 'Browse' button then find the file and click 'onclite_QCN_patched.qcn' then click 'Open' then click the 'Restore QCN' button and wait for it to finish (Restore Succeed), after finished then restart your device, all done.
Note:If you want to write IMEI or change IMEI, you can change IMEI via Unlocktool or UFI Box according your country by diag mode but just write one IMEI which is IMEI2, not IMEI1. If you write dual IMEI your device will be stuck on recovery.