Follow us on Youtube SUBSCRIBE
Beranda
Samsung A10s (SM-A107F)

Samsung A10s A107F Dead After Flash | Dead Boot Repair Without BOX Solved

Assalamu'alaikum warahmatullahi wabarakatuh. Hello friends, this time i want to share about Samsung A10s SM-A107F dead after flash via SP Flash Tool and ODIN Tool only, this device uses a Mediatek chipset and supported all binary.

Why on this device can dead after flash / upgrade / downgrade, because if the eMMC is lifted and read in the BOX Flasher, for example i use UFI Box then the userarea part menu shows all partitions and all partitions are lost and cannot be read or writen.

We need to know that a partition is a contiguous space of storage on a physical or logical disk (eMMC, harddisk) that functions as though it were a physically separate disk.

Partitions are seen by the system firmware and the installed operating systems.

Access to a partition is controlled by the system firmware before the system boots the operating system, and then by the operating system after it starts.

The partition cannot be seen by the system firmware and the installed operating system, so that each partition can't be read and written and the device can't turn on because eMMC doesn't work.

And how to restore all partitions so they can be seen by system firmware, operating system and can be read, written by BOX Flasher if using the BOX, we just need to write Primary GPT (GUID Partition Table) file to restore all that, what is GPT?

The GUID Partition Table (GPT) was introduced as part of the Extensible Firmware Interface (EFI) initiative, GPT provides a more flexible mechanism for partitioning disks (eMMC, harddisk).

Here I do it without using BOX Flasher even though I have a UFI Box, why is that?

I want to make it easier for all of my friends who don't have BOX Flasher, because this device uses a Mediatek chipset and can be flashed via the SP Flash Tool.

We only need to flash it via the SP Flash tool so that the device can open download mode and can proceed to the final stage by flashing the official firmware via the ODIN Tool.

The first step, flash via SP Flash Tool with the file below :

After flashing using the file above and then turning on the device, it will automatically go to download mode, then flash it using the official firmware via ODIN Tool, link file below :

Watch in Youtube

Posting Komentar